Box Facial Tissue Dimension Guide
Tissue Box Dimensions: Box Size vs Sheet Size
Quick answer
For a tissue-box quote, send three details: the outside box size, the size of one unfolded tissue, and the number of tissues per box. Write the box size as length × width × height in mm or cm. The box size alone cannot tell you the tissue size or count.
Minimum order: 10,000 boxes, supplied with tissues inside. Send a box photo or sample and tell us what you want to customize.

Start with the finished carton
Measure the outside of the box
Write the assembled box size as length × width × height, using mm or cm. Label each side on a photo or drawing so both you and the supplier know which measurement is which.
Length
Measure one horizontal side of the assembled box and label it as the length.
Mark this side on a photo or drawing and add the unit.
Width
Measure the other horizontal side, at a right angle to the length.
Keep length and width in the same order on each quote.
Height
Measure from the base to the top of the assembled box.
Check that the folded tissues fit and pull out smoothly.
Current TISVEN references
Box sizes you can use as a starting point
These are TISVEN box-size options for discussion. Choose one to review with your tissue size and count, or send a sample of the box you want to match.
REFERENCE 01
17 × 10.5 × 3.5 cm
REFERENCE 02
20 × 11 × 4 cm
REFERENCE 03
21 × 11 × 5 cm
REFERENCE 04
21 × 11 × 7 cm
Confirm the final dimensions and tissue fit on a sample before approving the order.

Keep the fields separate
Box dimensions are not the same as tissue sheet size
The tissue sheet is folded inside the carton, so an unfolded tissue measurement does not describe the finished box footprint or height. Current TISVEN box facial tissue references include tissue sizes of 180 × 155 mm or 180 × 175 mm and a draw-count range of 20–180 draws.
Those values still need to be reviewed as a combination. A draw count is not a box height, and a box height does not prove how many draws are inside. Tissue size, ply, fold, opening and packing all remain separate project fields.
- Tissue size
- 180 × 155 mm or 180 × 175 mm
- Draw count
- 20–180 draws
- Choose together
- Box size, tissue size, tissues per box and packing.
Factory production insight
Available tissue widths and cutting lengths
In Jiufeng's box facial tissue production, the machine head determines the unfolded tissue sheet width. Confirmed machine-head options include 180, 190 and 200 mm. These are examples of available widths, not a complete list or a statement of the maximum possible width.
In the reported factory setup, the unfolded sheet length comes from cuts across a 1,400 mm parent-paper width. Jiufeng has identified 200, 175, 156, 140, 127, 118, 108 and 100 mm as feasible sheet-length options for this setup. These are production references, not a mandatory standard-size list or a statement of the maximum size. Some lengths divide evenly into 1,400 mm; others can be made with trim waste, subject to the production cutting plan.
Sheet-length options for this factory setup
- 200 mm
- 175 mm
- 156 mm
- 140 mm
- 127 mm
- 118 mm
- 108 mm
- 100 mm
Width is specified separately by the machine head; these numbers refer only to the nominal unfolded sheet length. Confirm the exact width × length pairing for the requested project.
As simple mathematical examples, 1,400 mm can be divided into seven 200 mm, eight 175 mm, ten 140 mm or fourteen 100 mm sections before considering edge trim or cutting allowance. Other reported lengths remain feasible options but do not imply an equally exact division. Nominal dimensions alone cannot establish the actual knife layout, cutting yield or trim waste.
What buyers should specify
Provide the required unfolded sheet width and length separately, along with ply, draw count, folding and finished-box dimensions. The factory can then check machine compatibility, cutting yield and packaging fit before confirming an OEM quotation.
Comparison sheet
Compare each specification field for what it actually tells you
The common mistake is not a wrong number; it is using one field as a substitute for another. Keep carton, tissue and packing measurements separate before comparing two offers.
Common comparison mistakes
Four ways tissue-box dimensions get misread
Treating one 'standard' size as universal
Box sizes vary by brand and design. Measure the box you want to match.
Using box dimensions as tissue dimensions
Take out one tissue, open it flat and measure it. Its size is different from the box size.
Assuming a taller box automatically means more draws
A taller box does not always hold more tissues. Tissue size, layers and folding also affect how much space they take up.
Using flat artwork dimensions as the box size
A dieline is the flat cutting and folding template. Its dimensions are different from the assembled box, so label which one you are measuring.
OEM buyer checklist
What to confirm before requesting a box facial tissue quote
Send the box size, tissue size, tissues per box and packing details. If you only have a sample, send photos and tell us what you want to keep or change.
- 01Finished box dimensions in one consistent order with units
- 02Box format or a clear reference photo/sample
- 03Tissue sheet size
- 04Draw count: whole tissues per box
- 05Ply (layers per tissue) and fold, if known
- 06Dispensing opening or opening reference
- 07Artwork or dieline status
- 08Boxes per bundle and per shipping carton
- 09Quantity range and target market
Quote preparation
Copy this checklist to request a quote
Fill in what you know. Leave anything you are unsure about blank, and we can clarify it with you.
OEM BOX FACIAL TISSUE BRIEF
- Product: Box facial tissue
- Box format:
- Finished box dimensions (L × W × H):
- Tissue sheet size:
- Draw count:
- Ply / fold:
- Dispensing opening reference:
- Artwork / dieline status:
- Packing / carton configuration:
- Quantity range:
- Reference photo or sample:
Preparing a box tissue specification?
Send the finished box size and the tissue fields separately.
Tell us the box size, tissue size, tissues per box and order quantity. Add your logo or design if you have one. We can clarify the remaining details before preparing a quote or sample plan.